LKZ-1000

Wires and Pipe Locator

Cable routes without secrets thanks to LKZ-1000

Features

• Backlit LCD with contrast (auto on-off).
• Automatic adjustment of detection sensitivity.
• 5 operating modes.
• Warning about shallowly located cables.
• Measuring cable locations up to 3 m deep.
• Determining the direction of a cable.
• Sound signals to facilitate locating or tracing.
• Adjustment of power and selection of frequencies for the transmitter.
• Passive or active modes of tracing. • Detection of underground live wires.
• Detection of underground wires with no voltage (radio mode).
• Detection of underground wires with no voltage using a transmitter (galvanized, inductive or clamp-based connection).
• Tracing metallic or non-conductive pipes using an additional probe.
• Tracing non-conductive pipelines using a “floating” probe.
• Tracing a determined cable.
• Determining the depth of a cable.

Characteristics

Improved LKN-1000 transmitter delivers significantly higher power than previous model, which allows to:

• Tracking underground services over a, longer distances,
• Improve service detection in areas of high signal interference,
• Improve depth estimation.

Other benefits of the new transmitter:

• four adjustable output levels with maximum output level, of 1 W,
• durable waterproof design environmental protection rating of IP65,
• smaller and lighter designed to work in harsh conditions,
• choice of 3 tracing signals, 8 kHz or 33 kHz, in conductive mode 8 kHz and 33 kHz at the same time,
• clear visual and visual signals for easier operation,
• built-in test function – allowing operators to test the hardware and software functionality of the LKN-1000 before use,
• externally located control buttons, ensure a waterproof.

Operating modes

• Passive, with 50 Hz or 60 Hz – enables to locate live wires and cables (POWER).
• Passive RADIO (15-30 kHz) – enables a quick, non-selective locating operation for an underground structure (metallic installations).
• Active (with transmitter) (8 kHz and 33 kHz), enables:
  • a locating operation using the inductive mode (all one has to do is to place the transmitter over the object traced),
  • a locating operation through connecting the transmitter directly to an object that is not live,
  • a locating operation using transmission clamps (it is necessary to close the clamps over the object tested),
  • a locating operation using a transmission wire or transmission probes (enables to locate non-metallic objects),
  • a locating operation sing a separating adapter (connecting the transmitter LKN-1000 directly to a 230 V socket)