PAT-86

Portable Appliance Tester

Features

• Extensive measuring system enables:
  • measurement of welding equipment parameters:
    • rated voltage of welding devices in no-load condition,
    • welding circuit leakage current,
    • primary leakage current,
  • protective conductor resistance measurement,
  • residual voltage measurement,
  • measurement of insulation resistance in three points,
  • measurement of substitute, differential and touch leakage current,
  • functional test,
  • test of RCD and PRCD switches,
  • ...and much more.
• Intuitive user interface.
• Cooperation with a label printer and QR code scanner.
• Robust, compact housing.
• Operation time at rechargeable battery power supply: up to 1 hour.

Application

PAT-86 is used wherever safety is the most important thing. Ideally suited to situations where it is necessary to check welders, power tools, three-phase devices and household appliances.

Welders

PAT-86 was created for testing welding equipment in compliance with EN 60974-4 standard.

Capabilities

Thanks to the extensive measuring part, PAT-86 enables comprehensive checking of electrical devices. The touch screen and autoprocedures section make testing quick and efficient.

The meter cooperates with a label printer and QR scanner, which greatly facilitates the recordkeeping of tools. The following printouts are available:

• initial measurement report,
• QR code, where information on performed tests and the parameters of the tested device are saved. These data can be read and added to the meter memory using the optional QR code scanner.

The whole picture is complemented by a compact and durable housing. It provides instrument protection during both measurements and transport.

Memory

The memory has a tree structure. For each device tested it contains its description, location of measurements, customer data and registration number.

Communication

The meter provides many modes of transmission of measurement results: via USB, LAN and WiFi. In addition, it is possible to upload the results to a USB stick.

Dedicated PAT Analysis software allows for data management and also reports preparation - in several versions, depending on the user’s needs. In addition, it is possible to use the PAT Server solution. This system allows you to work in many modes, including:

• smooth data management,
• online upload to server,
• work through a web browser,
• work in task ordering mode,
• storing copies of data on the server.

Standards

The tester can be used to test the equipment performance in accordance with standards:

• EN 50678:2020 General requirements for safety testing of electrical equipment after repair.
• EN 50699:2021 Recurrent tests of electrical equipment.
• EN 60745-1 Hand-held motor-operated electric tools. Safety. Part 1: General requirements.
• EN 61029 Safety of transportable motor-operated electric tools. General requirements.
• EN 60335-1 Household and similar electrical appliances. Safety. General requirements.
• EN 60950 Safety of information technology equipment.
• EN 61557-6 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems.
• VDE 0404-1 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen.
• VDE 0404-2 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen.
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit.
• AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment.